AnyplaceUSB-2COM USB serial over IP adapter virtualizes COM port over network. The AnyplaceUSB Serial adapter is designed with the AnyplaceUSB software that manages sharing and connecting serial ports over a network (Internet/ LAN/WAN). With simple and user-friendly interface, the app is very easy to install and use. There are no complicated settings needing to be configured, nor do you need to change any of your existing network configurations. Only few simple steps will the app take you to make the serial devices ready to share from the Server or to connect from the Client to the shared serial devices over any network. To secure the connection between shared serial devices and remote client computers, password authorization is implemented for controlled access. The app can be set to allow only authorized personnel to remotely access and control your AnyplaceUSB serial adapter. Traffic encryption provides further protection on data security and keeps the entire data communication safe to secure connection. Data compression feature is also available to accelerate data transfer speed over network and the Internet.

Bus USB Bus
Interface RS-232
Plug & Play Supported
Serial Port
RS-232 Signals DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Max. Bitrate 921.6kbps
Serial Configuration

Data bits: 7, 8

Parity: None, odd, even, mark, space

Stop bits: 1, 2

UART FIFO Buffer Size 512 bytes transmit and receive FIFO
Operating Temperature 0°C to 55°C
Storage Temperature -20°C to 75°C
Humidity 5 to 95% RH. Noncondensing
Safety Approvals CE, FCC
Serial Port Two
Connectors Two DB-9 male connector
Protection 15kV ESD protection
Chipset FTDI USB 2.0 to UART Chip
Input Power Powered by USB port
Housing Plastic housing
Weight 86 g
Dimension 87mm(L) x 70mm(W) x 42mm(H)
  • Adds two high speed RS-232 serial ports by connecting to a USB port
  • Robust and compact plastic housing
  • Powered by USB port, no external power adapter required
  • 512 byte receive and transmit buffer for high speed data throughput
  • Requires no IRQ, DMA, I/O port
  • Data rates: 300bps to 1Mbps
  • Connector: two DB9 male connectors
  • RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
  • Monitor LEDs of TxD, RxD indicating port status
  • Drivers provided for Windows 10, 8.1, 8, 7, Vista, 2012, 2008, 2003, XP
  • Provides AnyplaceUSB software app to share RS-232 serial communication ports to a network over LAN/WAN/VLAN/VPN/Internet
  • Any authorized users at different locations may remotely access RS-232 serial communication ports over network
  • Traffic encryption protects data security and ensures secure connection
  • Data compression accelerates data transfer speed over network
  • Any serial devices connected to AnyplaceUSB-2COM can be accessed and used by any client computer over network or across the Internet
  • Shares RS-232 serial port between multiple computers from anyplace in the world via Ethernet/WAN/VLAN/VPN/Internet


The AnyplaceUSB software integrates both Server and Client functionality into one app with clear and simple interface. You need to install the program on the Server, the local PC where the USB Serial over IP Adapter is physically connected. Start the “Server” tab to share the Serial adapter.

On the Clients, where all the remote client computers needing to connect to the shared serial ports and devices, install the app and start the “Client” tab to access and use shared serial port and devices over network.

For Windows:

Download AnyplaceUSB V1.0 For Windows

For Linux RPM-based:

Download AnyplaceUSB V1.0 For Linux RPM 32 bit (x86)

Download AnyplaceUSB V1.0 For Linux RPM 64 bit

For Linux Debian-based:

Download AnyplaceUSB V1.0 For Linux Debian 32 bit (x86)

Download AnyplaceUSB V1.0 For Linux Debian 64 bit

Please note: AnyplaceUSB-2COM for Linux requires kernel version from 3.0.0-19 up to 4.4