Setting 3MBit Baud Rate for Better CAN Bus Performance
To get a better performance, set the USB to CAN adapter to work in high speed (3Mbits). After executing the command, please disconnect the USB to CAN adapter from the system for about 5 seconds and connect it again.
The set baud rate program (CAN_BAUDRATE_SET.exe) must be executed under command prompt with administrative privileges.
Following is set baud rate program command:
CAN_BAUDRATE_SET <COM-PORT>
Example: CAN_BAUDRATE_SET COM7
COM7: the USB to CAN adapter installed as “USB Serial Port (COMX)”.
You can check the port number under Device Manager.
After setting the baud rate successfully, you will find following message under “Command Prompt”:
Searching…
Find COM PORT: COM7
Setting every baud rate to 3Mbit…
Set baud rate Success