USB-to-Industrial RS-232/RS-422/RS-485 Adapter

USB-COMi-M is a single-port USB to RS-232/RS-422/RS-485 converter with dual connectors of DB9 & terminal block for flexible serial connectivity in industrial applications. The adapter is designed not only external power free; it can provide power output to external serial device when the feature is needed and enabled.

The USB-COMi-M USB to RS-232/422/485 adapter is a USB-ported serial adapter that adds one industrial RS-232, RS-422 or RS-485 port to your system. The adapter is designed with both DB9 male connector and 6-pin terminal blocks for flexible connectivity options. The operation mode of RS-232, RS-422 or RS-485 can be set conveniently via an external 4-pin dip switch, without the need to open the metal case. USB-COMi-M provides a unique and practical feature of supplying power output of 5V, 150mA from the terminal block to the serial device that requires power.


The USB-COMi-M supports automatic receive and transmit control in two-wire RS-485 mode. The adapter provides flexible termination and biasing options of built-in 120ohm termination resistors for TxD, RxD, CTS, and built-in 750 ohm biasing resistor for TxD, RxD. Designed in a compact, rugged metal housing with DIN rail bracket, the adapter is ideal for industrial applications. A variant model with 2KV DC optical isolation and 25KV ESD surge protection is also available.

Click for more detail


USB-to-Industrial RS-422/RS-485 Adapter

The USB-COMi-TB USB to RS-422/485 adapter is one of our new products that adds to a PC one RS-422/485 port with a 5-pin terminal block connector. The DIP switch for RS-422 and RS-485 mode setting is designed inside the plastic housing that can be sliding to open conveniently. Termination and biasing options are built-in. Next to the DIP switch, the 6 jumpers are inside the unit to enable TxD/RxD, 120 ohm termination resistors and RxD, TxD 750 ohm biasing resistor. User can set the operation mode easily by pushing down the upper case and sliding it to open for configuration.

The USB-COMi-TB supports 4 operation modes:

RS-422 4 wire with Handshaking

RS-485 Full Duplex (4 wire)

RS-485 Half Duplex (2 wire) with Echo

RS-485 Half Duplex (2 wire) without Echo


The adapter is designed with LED status indicators for power TxD and RxD for easy port monitoring and diagnostic. The RS-422/RS-485 port is protected with 10KV ESD surge protection. The serial port supports 128 byte transmit and 384 byte receive buffer. In half-duplex two-wire RS-485 mode, the feature of automatic receive and transmit control is available.


Click for more detail