Adds a high speed RS-232 serial port by connecting to a USB port

Send Enquiry


AnyplaceUSB-COM USB serial over IP adapter virtualizes COM port over network. The AnyplaceUSB Serial adapter is designed with the AnyplaceUSB software that manages sharing and connecting serial ports over a network (Internet/ LAN/WAN). With simple and user-friendly interface, the app is very easy to install and use. There are no complicated settings needing to be configured, nor do you need to change any of your existing network configurations. Only few simple steps will the app take you to make the serial devices ready to share from the Server or to connect from the Client to the shared serial devices over any network. To secure the connection between shared serial devices and remote client computers, password authorization is implemented for controlled access. The app can be set to allow only authorized personnel to remotely access and control your AnyplaceUSB serial adapter. Traffic encryption provides further protection on data security and keeps the entire data communication safe to secure connection. Data compression feature is also available to accelerate data transfer speed over network and the Internet.

In case you need to forward a USB device or would like to access a remote USB device from a virtual machine, this task can be easily accomplished with AnyplaceUSB software. Just by installing the software onto the host machine and client, you can share USB over Ethernet and access the device in the virtual session.


  • Adds a high speed RS-232 serial ports by connecting to a USB port
  • Robust and compact plastic housing
  • Powered by USB port, no external power adapter required
  • 512 byte receive and transmit buffer for high speed data throughput
  • Requires no IRQ, DMA, I/O port
  • Data rates: 300bps to 1Mbps
  • Connector: one DB9 male connector
  • RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
  • Monitor LEDs of TxD, RxD indicating port status
  • Drivers provided for Windows 10, 8.1, 8, 7, Vista, 2012, 2008, 2003, XP
  • Provides AnyplaceUSB software app to share RS-232 serial communication ports to a network over LAN/WAN/VLAN/VPN/Internet
  • Any authorized users at different locations may remotely access RS-232 serial communication ports over network
  • Traffic encryption protects data security and ensures secure connection
  • Data compression accelerates data transfer speed over network
  • Any serial devices connected to AnyplaceUSB-COM can be accessed and used by any client computer over network or across the Internet
  • Shares RS-232 serial port between multiple computers from anyplace in the world via Ethernet/WAN/VLAN/VPN/Internet


ComplianceUSB 2.0 High Speed, USB 1.1 compliant
Speed480Mbps, hi-speed USB
ConnectorUSB type B
FIFO512 bytes transmit and receive
Operating SystemsWindows 2000 up to Windows 10
Windows Server 2000 up to 2018
Linux kernel 2.6+
Mac OS X support available
InstallationThe driver is already installed (Linux), or automatically downloading and installing device drivers after Device connection (Windows).
Serial Interface
Number of Ports1
ConnectorDB9 male
Max. SpeedData transfer rates from 300 baud to 1 Mbaud
RS-232 SignalsDCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Protection15kV ESD protection for all signals
Serial Communication Parameters
Data Bits7, 8
ParityNone, Even, Odd, Mark, Space
Stop Bit1, 2
Flow ControlHardware (RTS, CTS), XON/XOFF
Power InputPower supplied via USB (5V) connector
No external power needed
CasingPlastic, ABS
Operating Temperature0°C to 55°C (32°F to 131°F)
Storage Temperature-20°C to 75°C (-4°F to 167°F)
Operating Humidity5% to 95% RH
Safety ApprovalsCE, FCC


Product Manual


The AnyplaceUSB software integrates both Server and Client functionality into one app with clear and simple interface. You need to install the program on the Server, the local PC where the USB over Ethernet Hub is physically connected. Start the “Server” tab to share USB devices.

On the Clients, where all the remote client computers needing to connect to the shared USB devices, install the app and start the “Client” tab to access and use shared USB devices over network.

For Windows:

CMD commands for Windows:
Example :
AnyplaceUSB.exe  -h
AnyplaceUSB.exe --show-usb-list
AnyplaceUSB.exe --share-usb-port=1:1 --tcp=12345

For Linux:

Please note: AnyplaceUSB for Linux requires kernel version from 2.6.18 up to 4.4

For kernel 5.0

For Mac OS:

macOS 10.9 and higher

USB to Serial Drivers for AnyplaceUSB USB Serial over IP Adapter


Q1: AnyplaceUSB application get error with Microsoft Hyper-V

Answer: Please update the application to version 1.2.